RAL Color Carbon Steel Coil Slit Edge Prepainted Skinpass PPGI Red Green
|Place of Origin:||China|
|Brand Name:||SHOUGANG; ANSTEEL; MASTEEL; BXSTEEL|
Payment & Shipping Terms:
|Minimum Order Quantity:||25 Ton|
|Packaging Details:||Coils covered with waterproof protective packing materails|
|Delivery Time:||10-25 working days|
|Supply Ability:||300 tons per month|
|Name:||Coil PPGI PPGL Red Green||Zinc Coating:||Z30-275g/m2|
|Edge:||Mill Edge Slit Edge||Application:||Roofing, Industry, Building Etc.|
|Surface:||Skinpass||Packing:||Standard Seaworthy Package|
|Alloy Or Not:||Alloy||Standard:||ASTM/EN/GBIT/3198-2010|
Slit Edge Prepainted Steel Coil,
Prepainted skinpass Steel Coil,
PPGI color Steel Coil
RAL Color New Prepainted Galvanized Steel Coil PPGI PPGL Red Green
PPGI is pre-painted galvanised iron, also known as pre-coated steel, coil coated steel, color coated steel etc., typically with a hot dip zinc coated steel substrate. The term is an extension of GI which is a traditional abbreviation for Galvanized Iron.
|Commodity||RAL Color New Prepainted Galvanized Steel Coil PPGI PPGL Red Green|
|Grade||SGCC/ CGCC/ TDC51DZM/ TDC52DT350GD/ DX51D+Z|
|Brand||SHOUGANG; ANSTEEL; MASTEEL; BXSTEEL|
|Standard||JIS,AISI,ASTM,GB,DIN, BS EN, AS|
|Delivery time||About 25 or based on the sales contract|
- PPGI Roofing Sheet production process is less harmful to the environment, and can be recycled, greatly reducing the pollution to the environment, and light weight, can save load-bearing Structure materials, reduce the cost.
Pre-paint steel is a bare metal substrate or corrosion resistant substrate that has had paint applied to both sides through a continuous coil coating process, which produces a uniform paint finish. The metal is unwound, cleaned and chemically treated during the process.
Pre-painted Galvanized Iron (PPGI)
The hot dip metallic coating process is typically used to coat steel sheet and coil which all may be factory pre-painted like PPGI. PPGI is also used to refer to metallic coated steels that have been pre-painted, by TSC offers PPGI that is zinc coated steel
Gauge Size Table:
|Gauge||SS inch||SS mm||Mild Steel||Galvanized Steel|
Surface finish :
|2B||Finished by heat treatment, pickling after cold rolling. Followed by skin pass line to be more brighter and smooth surface||General application Medical instruments, Tableware|
|BA||Bright heat treament after cold rolling||Kitchen utensil, kitchenware, architectural|
|8K||A mirror-like reflective surface by polishing with finer abrasives over 800mesh||Construction, mirrors, plate sets, decoration elevators|
|HL||Finished by continuous linear polishing||Architectural purpose, Escalators, kitchenware, vehicles|
|NO.1||Finished by hot rolling, annealing and picking, characterized by white pickled surface||Chemical industry Equipment, industrail tanks|
|NO.4||Polishing with NO.150 to NO.180 mesh abrasives specified in JISR6001||Kitchen utensils, Building Construction, Medical equipment|
What is the difference between galvanized and galvalume?
Galvanized steel is made completely of zinc, while galvalume includes aluminum, zinc, and a small amount of silicon. This provides superior durability and resistance to corrosion in comparison to galvanized coating
Prepainted Galvanized Steel Coil/PPGI Zinc Coating Metal Sheet packaging details :
1: Coils covered with waterproof protective packing materails ;
2: Then loaded in strong metal pallets +angle bar protection +steel strip ;
3: Well loaded and be transported to the loading port .
The innner size container as below :
1: 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM ;
2: 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM ;
3: 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM.
WHY CHOOSE US:
Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.
Q2: what is the terms of delivery?
A: FOB, CIF, CFR,
Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.
Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.
Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.
Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.