304L Cold Rolled Stainless Steel Sheet

Product Description

ASTM A240 304 304L Stainless Steel 316 316L CR Plate 2B Brush Finish

 

304 stainless steel is the most common stainless formula across industrial and consumer applications. With chromium and nickel alloys, 304 is resistant to many corrosion attacks. It’s also popular in a wide range of applications because no post-weld anneal (a reheating and slow cooling process that relieves stress in metals after exposure to high heat) is required.

 

Product introduction:

 

Commodity	Austenite Stainless Steel 300 Series 304 316 321 SS Plate 1500x3000 THK 2.5 MM
Grade	304 316 321
Brand	TISCO ,BAOSTEEL,POSCO,JISCO,LISCO
Certification	SGS,BV,IQI,TUV,ISO,etc
Thickness	2.5 mm
Width	1500 mm
Length	3000 mm or as per customers’ requirements
Surface	2B; HL; BA
Standard	JIS,AISI,ASTM,GB,DIN
Delivery time	About 15 -30 days or based on the sales contract
MOQ	1 Ton
Advantages	has good corrosion resistance after exposure to temperatures in the chromium carbide precipitation range

 

Compaire Grade 300 Series: 

 

304, 316 and 316L stainless steel formulas are austenitic, a term classifying the steel’s crystalline structure. This structure is achieved via heat treatment at very high temperatures followed by quenching—a rapid cooling process locking the structural characteristics in place. Austenitic formulas are stronger than martensitic or ferritic steels. Ferritic steels are magnetic, have a low carbon content and are less corrosion-resistant.

 

Chemical Composition:

 

Grade	C	Si	Mn	P	S	Ni	Cr	Mo
304	≤0.07	≤1.00	≤2.00	≤0.045	≤0.03	8.00～10.00	18.00～20.00	-
304L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.03	9.00～13.00	18.00～20.00	-
316	≤0.08	≤1.00	≤2.00	≤0.045	≤0.03	10.00～14.00	16.00～18.00	2.00～3.00
316L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.03	12.00～15.00	16.00～18.00	2.00～3.00

Physical Property:

 

Grade	Tensile Strength(Mpa)	Yield Strength(Mpa)	Elongation(%)	HBW	HRB	HV
304	≥520	≥205	≥40	≤187	≤90	≤200
304L	≥480	≥175	≥40	≤187	≤90	≤200
316	≥520	≥205	≥40	≤187	≤90	≤200
316L	≥480	≥175	≥40	≤187	≤90	≤200

 

Brand Cross Reference Table:

 

GB NEW BRAND	JIS	ASTM	UNS	KS	BS EN	AS
06Cr19Ni10	SUS304	304	S30400	STS304	1.4301	304
022Cr19Ni10	SUS304L	304L	S30403	STS304L	1.4306	304L
06Cr17Ni12Mo2	SUS316	316	S31600	STS316	1.4401	316
022Cr17Ni12Mo2	SUS316L	316L	S31603	STS316L	1.4404	316L

Surface Finish:

 

 

Surface Finish	Definition	Application
2B	Finished by heat treatment, pickling after cold rolling. Followed by skin pass line to be more brighter and smooth surface	General application Medical instruments, Tableware
BA	Bright heat treament after cold rolling	Kitchen utensil, kitchenware, architectural
8K	A mirror-like reflective surface by polishing with finer abrasives over 800mesh	Construction, mirrors, plate sets, decoration elevators
HL	Finished by continuous linear polishing	Architectural purpose, Escalators, kitchenware, vehicles
NO.1	Finished by hot rolling, annealing and picking, characterized by white pickled surface	Chemical industry Equipment, industrail tanks
NO.4	Polishing with NO.150 to NO.180 mesh abrasives specified in JISR6001	Kitchen utensils, Building Construction, Medical equipment

 

Thickness Gauge:

 

Gauge	SS inch	SS mm	Mild Steel	Galvanized Steel
3	0.25	6.35	0.2391
4	0.2344	5.95376	0.2242
5	0.2187	5.55498	0.2092
6	0.2031	5.15874	0.1943
7	0.1875	4.7625	0.1793
8	0.165	4.191	0.1644	0.168
9	0.1562	3.96748	0.1495	0.1532
10	0.1406	3.57124	0.1345	0.1382
11	0.125	3.175	0.1196	0.1233
12	0.1094	2.77876	0.1046	0.1084
13	0.0937	2.37998	0.0897	0.0934
14	0.0781	1.98374	0.0747	0.0785
15	0.0703	1.78562	0.0673	0.071
16	0.0625	1.5875	0.0598	0.0635
17	0.0562	1.42748	0.0538	0.0575
18	0.05	1.27	0.0478	0.0516
19	0.0437	1.10998	0.0418	0.0456
20	0.0375	0.9525	0.0359	0.0396

 

Packing:

 

Austenite Stainless Steel 12 Gauge Grade 304L 321 Cold Rolled Square Plate 2 types:

 

l Standard packing

 

 

l Fine packing

 

 

Factory and Machine Equipment:

 

We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,

 

1. CNC Flame Cutting Machine

2. CNC Plasma Cutting Machine

3. CNC Laser Cutting Machine

4. Bending Machine

5. Shearing Machine

6. Punch Machine

7. Driving Machine

 

Product Display:

 

 

WHY CHOOSE US:

 

Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.

Q2: what is the terms of delivery?
A: FOB, CIF, CFR,

Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.

Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.

Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.